Gripfoot

Grit Tape, Cleats and Tiles for Slip-Resistance

• Abrasive grit ‘anti-slip’ products with self-adhesive backing available in tapes, cleats and tiles.
• Provides additional grip underfoot on smooth surfaces.
• Hardwearing and easy to install.
• Gripfoot Tape – versatile for floor surfaces, machinery and vehicles
• Gripfoot Cleats (rectangular) are designed for use on steps and stairs.
• Gripfoot Tiles (square) are ideal for increasing safety on smooth, tiled floors.
• Conforms to Slip Resistance Test EN 13552 Category R13

Material: Abrasive grit consisting of aluminium oxide bonded to a polymer substrate. Solvent based acrylic emulsion adhesive backing. Product supplied with a moisture resistant release liner

Surface Finish: Grit

Operating Temperature: -10°c to +60°c

Resistant to Chemicals: N/A

Environmental Resistance: Suitable for indoor environments

UV Resistance: Yes

Typical Applications: Suitable for stairs, ladders, ramps, walkways and vehicles

Installation Method: Pressure sensitive self-adhesive tape

Product Performance: Conforms to Slip Resistance Test EN 13552 Category R13

Adhesion Strength: 2.5Kg/1”

Coating Thickness: 0.05mm

Solvent Residue: 0.005

Release Force: 13Kg/m2

Gripfoot

Grit Tape, Cleats and Tiles for Slip-Resistance

• Abrasive grit ‘anti-slip’ products with self-adhesive backing available in tapes, cleats and tiles.
• Provides additional grip underfoot on smooth surfaces.
• Hardwearing and easy to install.
• Gripfoot Tape – versatile for floor surfaces, machinery and vehicles
• Gripfoot Cleats (rectangular) are designed for use on steps and stairs.
• Gripfoot Tiles (square) are ideal for increasing safety on smooth, tiled floors.
• Conforms to Slip Resistance Test EN 13552 Category R13

Material: Abrasive grit consisting of aluminium oxide bonded to a polymer substrate. Solvent based acrylic emulsion adhesive backing. Product supplied with a moisture resistant release liner

Surface Finish: Grit

Operating Temperature: -10°c to +60°c

Resistant to Chemicals: N/A

Environmental Resistance: Suitable for indoor environments

UV Resistance: Yes

Typical Applications: Suitable for stairs, ladders, ramps, walkways and vehicles

Installation Method: Pressure sensitive self-adhesive tape

Product Performance: Conforms to Slip Resistance Test EN 13552 Category R13

Adhesion Strength: 2.5Kg/1”

Coating Thickness: 0.05mm

Solvent Residue: 0.005

Release Force: 13Kg/m2

Flux Core Wire 0.9mm Self-Shielding – 1kg Spool
Achieve strong, efficient welds with this 0.9mm self-shielding flux core wire – ideal for gasless MIG welding tasks. Designed for use without shielding gas, it's perfect for outdoor conditions and ensures high productivity with minimal spatter and clean slag removal.

Features and Benefits

• Self-Shielding Design: No external shielding gas required – ideal for outdoor or drafty environments.

• Smooth Feeding and Arc Stability: Ensures reliable performance and easy handling during welding.

• Low Spatter and Easy Slag Removal: Reduces cleanup time and improves weld appearance.

• Versatile Application: Suitable for welding mild steel in automotive repairs, metal fabrication, farm equipment, and DIY projects.

• What’s in the Box: 1 x Flux Core Wire Spool (0.9mm, 1kg).

• Wire Type: Flux Core (Self-Shielding)

• Wire Diameter: 0.9mm

• Weight: 1kg

• Material: Mild Steel

Self-Shielding

5kg

E71T-11

Convenient aerosol application for use on slides, guides, chains, linkages and other hard-to-reach areas. Protection against metal-to-metal contact giving longer machine life and greater productivity. Excellent anti-corrosion and adhesion properties inhibits metal rusting under humid conditions.

Directions for use: Shake well before use. Spray liberally onto areas to be treated. Wipe away any excess with a cloth. Reapply as required.

Appearance: Soft, white, tacky grease

Thickener: Bentonite

Working Temperature: -20 °C to 160 °C

Drop Point, °C: No drop point

Rust Test, D1743: Pass

Spanjaard FMG-X White Multi-Purpose Grease (Food Grade) is recommended for the general lubrication of equipment in food and beverage processing plants, including bushes, bearings and other machine parts. Although designed for incidental food contact applications, the excellent lubricating properties allow use in a variety of other applications, allowing rationalisation of lubricants. Provides very good water resistance properties which protect equipment against rusting especially in humid seasonally in-operative plants. Anti-wear additives protect against metal-to-metal contact giving longer machine life and greater productivity.

Directions for use: Apply by hand or grease gun. If replacing a non-bentonite-thickened grease, flush out old grease completely when switching lubricants. This is achieved by frequent re-greasing over a short time span.

NLGI Consistency: 1.5

Worked Penetration, 25°C, 1/10mm: 285 – 325

Colour: White

Thickener: Bentonite

Working Temperature, °C: -20 °C to 160 °C

Drop Point, °C: No drop point

Rust Test, D1743: Pass

Copper corrosion: 1b

4-Ball Weld Load (kgf): 500kgf

Oil Separation (1000C, 30hrs): 3%

Spanjaard FMG-X White Multi-Purpose Grease (Food Grade) is recommended for the general lubrication of equipment in food and beverage processing plants, including bushes, bearings and other machine parts. Although designed for incidental food contact applications, the excellent lubricating properties allow use in a variety of other applications, allowing rationalisation of lubricants. Provides very good water resistance properties which protect equipment against rusting especially in humid seasonally in-operative plants. Anti-wear additives protect against metal-to-metal contact giving longer machine life and greater productivity.

Directions for use: Apply by hand or grease gun. If replacing a non-bentonite-thickened grease, flush out old grease completely when switching lubricants. This is achieved by frequent re-greasing over a short time span.

NLGI Consistency: 1.5

Worked Penetration, 25°C, 1/10mm: 285 – 325

Colour: White

Thickener: Bentonite

Working Temperature: -20 °C to 160 °C

Drop Point: No drop point

Rust Test, D1743: Pass

Copper corrosion: 1b

4-Ball Weld Load (kgf): 500kgf

Oil Separation (1000C, 30hrs): 3%

Power: 1500W

Voltage: 220V/50HZ

Trays: 20 Trays

Tray Size: 285 x 385 mm

Machine size: 420 x 575 x 830 mm

Efficient saw chain

The garden pruner’s robust STIHL Picco Micro 3 saw chain and high chain speed of 8 m/s guarantee quick results and a clean cutting pattern.

LED charge level indicator

Thanks to the easily readable LED charge level indicator, the user can check at the push of a button how much battery capacity is left at any time.

Tool-free chain replacement

Thanks to the sprocket cover with wing nut, replacing the chain is very straightforward. No tools are required. Manual chain tensioning is not necessary.

• 32 straight blades

• 0.010 brass blade for ignition

• Decimal and metric sizes

• Harden, tempered high quality steel blades

• 300mm length of easier access to long distance area

• 20 blades, size from 0.05 to 1.00mm