8304 Results

Per Page
    • In Stock

    • Use

      Well suited for battery sizes up to approximately 500Ah. It can maintenance charge batteries indefinitely and handle parallel consumption up to 30A while charging. The charging voltage is temperature compensated with an external sensor.

       

      14,7 V

      Some batteries require a higher charging voltage than others (this is described son the battery). Press the 14.7V button, and the initial charging voltage will be 0.3V above than the standard level.

       

      Power supply mode

      When you need continuous current and stable voltage during ECU programming or battery replacement, you can use our workshop chargers as a power supply. Activate Powersupply-mode by holding the “ON” button until the display begins to light up in sequence.

    • Technical specifications
      Input voltage [VAC] 230
      Operating temperature [ºC] -20/+50
      Charging voltage* S1 [VDC] 14,4/14,7
      Maintenance charging S2 [VDC] 13,6
      Charging current [A] 25
      Battery size, max [Ah] 500
      IP rating [IP] 20
      H/W/D [mm] 202x98x53
      Weight [kg] 2,2
      Certifications  EN60335-1, EN60335-2-29,
      EN55014-1, EN55014-2,
      EN61003-3/2

       

    • N$10,359.00

    • Defa 25A Workshop Charger 12V

    • DEFA WorkShopCharger 25A is based on modern switch-mode
      technology and galvanized divisions. This charger represent the
      latest technology within battery charging and will give the batteries
      optimum life.
    • Code: 9109140160
    • In Stock

    • DC Power Consumption: Variable from 0.5 – 3.0 AMPS

      Power: Built-in 240V AC/12V/24V DC

      On/off reed switch installed for the interior LED light

      Robust corner protectors & handles

      Larger lockable door latch for ease of access

      1 strong reinforced basket

      Operates as all fridge or all freezer

      Powered by the highly efficient and robust SAWAFUJI SWING MOTOR

    • Capacity: 40 Litres (60 x 375ml cans)

      Weight: 24 kg

      Dimensions: 360 × 631 × 508 mm

    • N$17,699.00

    • Engel Fridge/Freezer 40L

    • Code: 9119410040
    • In Stock

    • Installs to the side profile of your Front Runner Slimline II Roof Rack.

      Swings out 90 degrees from the side of the rack, allowing your water tap to clear the side of your vehicle.

      The spring pin locks the extension bracket in a closed or opened position.

      Features a shower head holder.

    • Consists of:

      • 1 x Tap Extension Bracket
      • Installation Hardware
      • Fitting Instructions

      Materials used: Black powder coated high strength steel

      Product Dimensions: 315mm (12.4") L x 187mm (7.4") W x 73mm (2.9") H

      Weight: 1.3kg (2.9lbs)

    • N$812.00

    • Bracket for Tap Extension

    • Extend your Water tank tap away from your vehicle to make pouring stored water effortless when out on any adventure.
    • Code: 9131009045
    • Out of Stock Online

    • The adjustable stainless steel latch with safety catch holds your Jerry Cans firmly in place over a lifetime of off-road abuse.

      For use with 20l / 5.3 gallon NATO/Wedco style military cans.

      This strap covers the Jerry can caps. Add your own cable lock or Rack Accessory Lock / Small and you'll never have to worry about stolen fuel while on the road.

      Made of black powder coated high strength steel and designed to easily bolt to the Front Runner Roof Racks using the flat slotted slats in the rack.

      Note: Not suitable for Scepter Style containers.

    • Consists of: 1x Strap Assembly, 1x Base, 2x Catches, Installation Hardware, Fitting Instructions

      Material: Black powder coated high strength steel

      Dimensions (LxWxH): 513 x 333 x 371 mm

      Weight: 4.3 kg

    • N$1,475.00

    • Bracket Jerry Can Holder

    • Code: 9131010011
    • In Stock

    • The adjustable stainless steel latch with safety catch holds your Jerry Cans firmly in place over a lifetime of off-road abuse.

      For use with 20l / 5.3 gallon NATO/Wedco style military cans.

      This strap covers the Jerry can caps. Add your own cable lock or Rack Accessory Lock / Small and you'll never have to worry about stolen fuel while on the road.

      Made of black powder coated high strength steel and designed to easily bolt to the Front Runner Roof Racks using the flat slotted slats in the rack.

      Note: Not suitable for Scepter Style containers.

    • Consists of:   1x Strap Assembly, 1x Base, 1x Catch, Installation Hardware, Fitting Instructions

      Material: Black powder coated high strength steel

      Dimensions (LxWxH): 513 x 165 x 370 mm

      Weight: 2.4 kg

    • N$845.00

    • Bracket Jerry Can Holder

    • Code: 9131010012
    • Out of Stock Online

    • The Shower Arm unhooks easily from the base and folds in half, compact, to be stored under a car seat or inside a Front Runner Wolf Pack, etc.

       

      Mounts anywhere off the side of a Front Runner Roof Rack.

      Please Note: This product is not compatible with Frontrunner Slimsport rack kit range.

       

      Materials used:

      2.5mm (0.098") black powder coated stainless steel

      Lightweight and can carry up to 20l (5.28 gallons) of water suspended from the roof rack

       

      Consists of: Lower shower arm, upper shower arm and a nuts and bolts kit

      Product Dimensions: 530mm (L) x 120mm (W) x 90mm (H)

      Weight: 2kg

      Maximum Load Capacity: 25kg

    • N$640.00

    • Bracket Shower Arm MKII

    • Code: 9131010024
To top