Charge for oil is a high mileage oil additive for the car with some wear and tear and using oil. A viscosity index improver prevents blow-by by maintaining oil viscosity throughout the temperature range preventing oil smoke. Anti-wear agents provide extra boundary lubrication protection reducing further wear of engine parts while quietening valve train and engine noise. Use in manual gearboxes and differentials or as an assembly lube, to ensure superior wear protection and smooth operation.

Packaging:          375ml

                             500ml

• Reduces oil consumption in engines with signs of wear
• Minimises exhaust smoke by providing better piston ring sealing
• Improves oil pressure to better protect moving parts
• Provides anti-wear protection to reduce further wear

Superior flushing fluid additive to be used before an oil change. Wynn’s Engine Flush, is fast acting and provides extra wear protection while dissolving sludge and oil deposits with a unique anti-wear additive. Flush after just 15 minutes or continue activation for up to 200km’s while you drive. Engine Flush will remove sticky deposits from the pistons rings restoring compression as well as clean out oil channels and galleries to ensure complete lubrication of all working components when oil is replaced.

Packaging:          375ml

• Cleans engines internally while providing anti-wear protection
• Frees sticky piston rings, hydraulic valve lifters, and variable timing systems
• Removes lacquer, varnish & sludge deposits from the crankcase
• Restores compression

Chilly Willy is a pre-mixed high performance inorganic coolant /antifreeze package for old and modern vehicles. Made from the finest Euro spec glycols, anti-corrosion and anti-foam agents to provide superior protection.

Freezing Point: -250 C (ASTM D1177)

ASTM D3306/D4985; SAE J-1034; British & Fed. Standards.

Packaging:          1L

                              2L

Wynn’s Coolant/ Antifreeze is a concentrate designed to meet old and modern vehicle requirements made from the finest Euro spec glycols, anti-corrosion and anti-foam agents to provide superior protection.

• Freezing Point at 40% dilution -25 degrees C (ASTM D1177)
• Wynn’s Coolant/Antifreeze meets ASTM D3306/D4985;
• SAE J-1034; British & Fed. Standards
• Protects cooling system from fouling
• Prevents corrosion
• Anti-foaming agent prevents cavitation and pitting

Applications

• Suitable for all radiator types from classics to modern aluminium core radiators
• The 1 Litre concentrate can be diluted with demineralised water as per vehicle's requirements

Directions

• Dilute contents as desired, then simply pour into the radiator filling reservoir until it is full
• Run the vehicle until normal operating temperature is reached
• Continue to top up while vehicle is idling until the full level is maintained
• It is recommended that all old coolant is flushed using Wynn’s Radiator Flush before replacing with new coolant
• Do not mix with OAT coolant

Packaging

12 x 1 Litre

Wynn's Hydraulic Valve Lifter Concentrate is an oil soluble supplement designed to restore efficient working of hydraulic valve lifters.

Packaging:          PN 76841 – 24x325 ml – NL/FR/DE/IT/DA/NO/HU

PN 76844 – 24x325 ml – EN/ES/RU/SV/FI

• Releases sticking valve stems and hydraulic valve lifter components.
• Quietens valve train noise.
• Dissolves dirt, gum and varnish deposits in the oil channels.
• Contains EP agents for extra protection.
• Does not harm catalytic converters.
• Compatible with all mineral, synthetic, single- and multigrade oils and suitable for regular and low SAPS applications.

Designed to dissolve high temperature petrol deposits on the injector pintle, keeping injectors clean and lubricated. Removes water from the fuel system, restores efficient fuel delivery and is safe to use with all fuel system components including high pressure direct injection, catalytic converters and O2/ lambda sensors.

Packaging:          375ml

• Reduces exhaust smoke caused by incomplete fuel combustion
• Removes injector pintle deposits restoring fuel flow and optimum fuel atomisation
• Improves fuel economy and overall engine performance

<iframe width="560" height="315" src="https://www.youtube.com/embed/9P96_LcfSoQ" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>

Wynn’s Engine Start is the easy solution to starting problems. Avoids wear of the starter motor and prevents battery drain. Engine start assists with cold weather starting, flooded engines and helps restore fuel pump pressure after a vehicle has run dry.

Unlike many starting fluids, Wynn’s Engine Start can be used in 4 stroke and 2 stroke engines as it contains a friction proofing lubricant.

• Fast acting starting solution
• 2 stroke engine safe
• Contains friction proofing
• For petrol or diesel engines

Applications

• Petrol or Diesel engines to promote easy starting
• Vehicles and motor bikes, especially if not in regular use
• Outboard motors and two stoke engines
• Mowers, chain saws, weed eaters etc.

Directions

• Hold can upright              
• Remove air filter for best results              
• Spray into air intake for a few seconds then crank engine            
• Repeat if necessary       

Packaging

12 x 200ml

12 x 375ml

Wynn’s Gear Oil Treatment and Assembly Lube, is a fully supplementary gear oil package scientifically formulated using the latest technology to provide all the below listed gear box, differential and wide variety of automotive and industrial equipment. Formulated to meet international vehicle manufacturer’s specifications of extreme pressure gear oils and recommended for use in limited slip differentials.

Packaging:          90g

• Reduces gear friction & wear extending component life
• Provides oxidation & shear stability for longer oil life
• Quietens diff & manual gearbox whine providing smoother gear changes
• Anti-Wear & Extreme Pressure additives provide excellent protection during engine rebuilds & component assembly

Wynn’s Exhaust Sealant provides an easy, permanent and gas tight seal of small to medium sized holes in the exhaust. The heat of the exhaust hardens the sealant to form a solid permanent fix.

• Seals small to medium sized holes
• Heat cures to create permanent seal
• Cost effective solution

Directions

• Clean surface of any dirt or oil
• Place Exhaust Sealer putty externally over the hole
• Allow to dry
• Start engine to supply heat for curing

Packaging

12 x 200g

High quality heavy duty grease intended primarily for automotive universal joint application. Excellent adherence and high temperature characteristics ensure proper lubrication of moving parts at all times.

Packaging:          90g

• High resistance to water wash
• Excellent protection against rust and corrosion
• Long service life
• Good retention under shock loading