• Steel toe cap designed to withstand an impact load of 200 joules
• Buffalo leather for durability
• Oil and acid resistant sole with anti-slip and anti-static properties
• Shank reinforcement for support and stability
• PU/PU sole for comfort, shock absorption and durability
• EVA innersole for comfort and shock absorption

Material: Buffalo Leather

• Steel toe cap designed to withstand an impact load of 200 joules
• Buffalo leather for durability
• Oil and acid resistant sole with anti-slip and anti-static properties
• Shank reinforcement for support and stability
• PU/PU sole for comfort, shock absorption and durability
• EVA innersole for comfort and shock absorption

Material: Buffalo Leather

Upper: Genuine split leather | 5 pair D-ring lace-up | Padded bellows tongue and collar for comfort

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock for flexibility, comfort and stability

Midsole: Steel midsole available

Toe cap: Steel

Sole: Double Density PU/PU (Heat-resistant up to 95°C)

Upper: Full grain leather | 4 pair D-ring lace-up with hooks | Padded bellows tongue and collar for comfort | Extra-wide fitting upper as per podiatry specifications

Lining: Needle-fibre vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock with Poron at the ball and heel of the foot for flexibility, comfort and stability | Anti-bacterial Energiser EVA top sock with Poron at the ball and heel of the foot for comfort and anti-fatigue support

Midsole: Engineered with an EVA heel insert for shock absorption | Shank reinforcement for additional arch support | Steel midsole available

Toe cap: Steel - extra-wide fitting

Sole: Double Density PU/PU (Heat-resistant up to 95°C)

Upper: Full grain leather | 5 pair D-Ring lace-up | Padded collar for comfort | Reflective safety tab on rear

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock for flexibility, comfort and stability | Anti-bacterial Energiser woollen top sock with anti-microbial properties

Midsole: Shank reinforcement for arch support | Steel midsole available

Toe cap: Steel | Available without toe cap

Sole: Double Density PU/PU (Heat-resistant up to 95°C)

Upper: Full grain leather | 3 pair eyelet lace-up | Padded collar for comfort | Reflective safety tab on rear

Lining: Needle-fibred vamp lining for excellent perspiration absorbency | Anti-static, non-woven in-sock forflexibility, comfort and stability | Anti-bacterial Energiser woollen top sock with anti-microbial properties

Midsole: Shank reinforcement for arch support | Steel midsole available

Toe cap: Steel | Available without toe cap

Sole: Double Density PU/PU (Heat-resistant up to 95°C)

Promax is applicable for:

• asbestos removal
• accident attendance
• fibre exposure
• food
• electronic assembly
• pharmaceutical environments
• painting and spraying

The Radebe boasts everything that you could possibly want from a mining boot but has several new features that puts it above the rest. Equipped with a TPU sole, it features increased elasticity and improved abrasion resistance for the harshest and most unwelcoming surface conditions, while the addition of a reflective strip adds all-important increased visibility. For so dangerous an occupation as mining only the very best will do, and you don’t get much better than the Radebe.

• Extreme Abrasion Resistance
• Ultra-Slip Resistant
• Increased Resistance to Oil & Grease
• CE EN ISO 20345 Approved
• Reflective Strips
• genuine Split Buffalo Leather Upper
• Lightweight and flexible Dual Density PU/TPU Sole
• Steel Toe Cap with Impact Protection of 200 joules
• Shock Absorbent Heel
• Removable Anti-Static Inner Soles
• Heat Resistant To 90º Celsius
• Wider Cut for Added Comfort
• Stylish Design

Upper: Breathable canvas | 10 pair eyelet lace-up

Lining: Needle-fi bred vamp lining for excellent perspiration absorbency | Polyester and viscose top sock for additional comfort

Toe cap: Not available

Sole: Single Density PU (Heat-resistant up to 95°C)

• High quality, full grain cow leather upper
• Classic styled, formal boot that doesn’t compromise on industrial safety features
• EN-ISO 20345 approved carbon steel toe cap
• Lightweight and comfortable dual density polyurethane sole
• Ultra comfortable REBEL Safetygear footbed inner sole
• Taibrelle moisture wicking lining

Materials:

• Upper: Bartan Print Leather Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle

Eyelet:

• D-Rings

Special Features:

• Padded Tongue ensures maximum comfort
• Padded Upper Collar ensures increased comfort

Sole:

• Sole resistant to 90ºC (degrees Celsius)
• Dual Density Poly-Urethane Sole
• Inner Sole - Removable Inner Soles
• Temperature Maximum 90ºC (degrees Celsius)
• Oil Resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Wide Profile Carbon Steel Toe-Cap
• Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

A quality chemical, water and heat resistant, anti-penetration workboot. The Chemitrak S3 Boot is ISO 20345 and SABS approved. These specialized workboots have been designed to keep your feet safe in the harshest of conditions. The full grain, high quality S2 (water resistant), black treated waxy cow leather offers high resistance to chemicals, heat, flame, oil and mould.

• Full grain, high quality S2 (water resistant) – black treated waxy cow leather: - high resistance to chemicals, heat, flame, oil and mould
• 100% natural nitrile rubber sole - heat resistant up to 300°C (Degrees Celsius)
• Anti-penetration steel midsole
• Breathable and abrasion resistant blue Taibrella lining
• Wide profile carbon steel toe cap
• Nickel-free D-rings
• Hydroseal waterproof lining

Materials:

• Upper: Full Grain, High Quality S2 Black Waxy Cow Leather: Highly Resistance to Chemicals, Flame, Oil & Mould
• Inner Sole: Biagioli IBITECH 252 2mm Foam Insole Board
• Mid Sole: Anti-penetration steel mid sole
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Eyelet:

• Nickel-free Eyelet 

Sole:

• 100% Nitrile Rubber Sole – cemented
• Temperature Maximum 300ºC (degrees Celsius)
• Heat and Oil resistant Nitrile Rubber Sole
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles
• Anti-penetration steel mid sole

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Chemical Applications:

• Leather coating ensures maximum chemical, flame, mould and water resistance

Adventure wear workboots designed to go anywhere. Our Adventure wear range offers you high performance outdoor styling. The Expedition Hi is ISO 20345 and SABS approved. This safety boot features a quality Nubuck leather upper, a rubber toe-bumper, an EVA/rubber and anti-penetration nail guard sole, and a steel shank for torsional rigidity.

• ​Nubuck Leather upper
• Rubber toe-bumper for added scuff protection
• EVA/Rubber outsole for high durability & comfort
• Tailbrelle moisture wicking lining
• Steel shank for torsional rigidity
• Hygienic removable cushioned innersole with anti-microbial properties

Materials:

• Upper: High quality Nu-Buck Leather Upper
• Inner Sole: Padded Anti-microbial Foam with Anti-Static Properties / Steel Mid-sole (Anti-penetration)
• Lining: Breathable and Abrasion Resistant lining

Eyelet:

• Fabric Loops and Polyurethane Rings

Special Features:

• Padded Inner Sole allows greater comfort
• Steel Mid Sole for anti-penetration
• Upper has S2 Water-resistant property
• Sole offers exceptional gripping qualities
• EVA Rubber sole designed to ensure high durability
• Padded Bellows Tongue ensure additional comfort
• Padded Upper Collar ensures increased comfort
• Rubber Toe-Bumper for added scuff protection

Sole:

• Temperature Maximum 120ºC (degrees Celsius)
• Oil and acid resistant EVA/Rubber
• Slip Resistance - Tested to EN345 and meets these requirements. However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance