This is a belted harness with non-specialised features and is recommended for those who need to navigate obstacles while working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point. The adjustable leg straps improve safety to the wearer through a customised fit, while the adjustable shoulder straps and waist buckle provide enhanced comfort to the wearer. 

The harness comes standard with a suspension trauma prevention strap that can be deployed in the event of fall, providing the wearer with a standing step to maintain healthy blood flow whilst awaiting rescue.

• Permanently attached double leg, shock absorbing lanyard, with scaffolding hooks
• Adjustable shoulder, leg, waist and chest straps
• Standing step
• Double Snap hooks

This is an endless round climbing sling that is used to create an anchor point over a structure that is too large for the fall arrest connector hook.

The sling is comprised of 38mm seat belt webbing that is encased into 50mm tubular webbing to protect the equipment against abrasive material thereby enhancing the durability of the sling and improving the safety to the user.

Supplied as a set of two units, the user would wind each sling around the structure, connecting one fall arrest connector hook to one climbing sling.

It is important to note that the distance from the anchor point (now created on the structure) to the fall arrest body harness anchor point must not exceed 2000mm, i.e. 1750mm (lanyard length) + length of the endless round climbing sling < 2000mm.

• 38mm seat belt webbing encased into a 50mm tubular webbing
• Supplied as a set of two