Specially recommended for gearboxes hard to shift and Peugeot, Citroën, Renault… gearboxes.

All mechanical transmission, synchronized or not synchronized gearboxes, gearbox/differential and transfer gearboxes without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.

Application: Transmission Lubricants

Quality: Thechnosynthese

Product Range: Car

Viscosity: 80W-90

API Standards: API GL-4, API GL-5

Capacity: 1 litres

Manual Transmission Fluid

Quality: Technosynthese

Viscosity: 75W-90

API Standards: API GL-5, API GL-4, MIL-L 2105 D

Specially recommended for gearboxes that are hard to shift and/or noisy.

Suitable for all types of mechanical transmissions.

Compatible with both synchronised and non-synchronised gearboxes.

Applicable to gearbox/differential systems, transfer gearboxes, and hypoid differentials without limited slip systems.

Designed for systems operating under shocks, heavy loads, and low revolution speed.

Also effective for moderate loads and high revolution speed scenarios.

100% Synthetic High Performance lubricant specially engineered for most modern automatic transmission (manual mode, sequential mode, electronically controlled …) with or without slip lockup clutch.

Particularly recommended for use in automatic gearboxes of American car makers GM, FORD, CHRYSLER…, Asian car makers HYUNDAI, KIA, MITSUBISHI, NISSAN, SSANGYONG, SUBARU, TOYOTA..., or European car makers BMW, CITROËN, FIAT, MB, PEUGEOT, RENAULT, …

Also recommended for use in older automatic gearboxes, torque converters, power steering, boats reverse gears, hydrostatic transmissions, mechanical and hydraulic systems where DEXRON (except DEXRON VI) or MERCON fluids are required.

Application: Transmission Fluid

Quality: 100% Synthetic, Synthetic-Technology

Product Range: Car, Commercial Vehicles

Capacity: 1 litres

High performance synthetic Technosynthese® fluid specially engineered for Continuously Variable Transmission (CVT) gearbox type.

Suitable for use in a wide range of vehicles fitted with CVT gearboxes using either chain/pulleys or belt/pulleys design.

Especially suitable for vehicles from American car makers GM, FORD, CHRYSLER,…, Asian car makers HONDA, HYUNDAI, KIA, LEXUS, INFINITI, MITSUBISHI, NISSAN, SUBARU, TOYOTA,... or European car makers AUDI, BMW, CITROËN, MERCEDES, PEUGEOT, RENAULT, …

Attention, not recommended for CVT unit fitting hybrid vehicles. Before use always refer to the owner manual or handbook of the vehicle.

Application: Transmission Fluid

Quality: Technosynthese®

Product Range: Car

Capacity: 1 litre

Conforms to DIN ISO 8976 Form C
With safety box joint and finger protection
Automatic clamping with offset gripping surfaces
GEDORE chrome-vanadium special steel, chrome-plated, with polished surface
Induction-hardened serrated faces
Model C = slim handles with forged serrations
Model JC = chrome-plated, 2-component handles

For Similar DIY Tools, Please Click Here

• Length (L, L1): 250 mm
• Length (L2): 32.5 mm
• Width of head (b, b1, n, W3): 4.8 mm
• Height of head (a, a1, b, h, L2, t): 48 mm
• Clamping width: 31 mm
• Weight: 335 g