Africa’s hardest working boots! The Kontrakta Boot is ISO 20345 and SABS approved. If you need to put safety boots on your contract staff, and are worried that the job might take longer than expected, then these are for you. These safety boots feature a high quality Barton print leather, a steel toe cap and a lightweight and comfortable dual density polyurethane sole.

• ​High quality, full grain cow leather upper
• Classic styled, formal boot that doesn’t compromise on industrial safety features
• EN-ISO 20345 approved carbon steel toe cap
• Lightweight and comfortable dual density polyurethane sole
• Ultra comfortable REBEL Safetygear footbed inner sole
• Taibrelle moisture wicking lining

Materials:

• Upper: Bartan Print Leather Upper
• Inner Sole: Removable Inner Soles
• Lining: Breathable and Abrasion Resistant Tai-brelle

Eyelet:

• D-Rings

Sole:

•  Dual Density Poly-Urethane Sole
• Temperature Maximum 90ºC (degrees Celsius)
• Oil Resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements, however, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Wide Profile Carbon Steel Toe-Cap
• Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

• High quality, full grain cow leather upper
• Classic styled, formal boot that doesn’t compromise on industrial safety features
• EN-ISO 20345 approved carbon steel toe cap
• Lightweight and comfortable dual density polyurethane sole
• Ultra comfortable REBEL Safetygear footbed inner sole
• Taibrelle moisture wicking lining

Materials:

• Upper: Bartan Print Leather Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle

Eyelet:

• D-Rings

Special Features:

• Padded Tongue ensures maximum comfort
• Padded Upper Collar ensures increased comfort

Sole:

• Sole resistant to 90ºC (degrees Celsius)
• Dual Density Poly-Urethane Sole
• Inner Sole - Removable Inner Soles
• Temperature Maximum 90ºC (degrees Celsius)
• Oil Resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Wide Profile Carbon Steel Toe-Cap
• Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

The new REBEL Safetygear Platinum Collection offers you the latest safety innovations in safety footwear products that are also built to look genuinely good and offer extreme comfort. The Lo-Top shoe is ISO 20345 approved. This stylish safety shoe offers you an easy slip-on solution with supreme comfort. A high quality, premium leather is used, while safety features include steel toe cap, anti-static, oil resistance and heat resistance.

Materials:

• Upper: Quality, Durable Tear-Resistant Microfibre Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle

Eyelet:

• Round Eylets

Special Features:

• Smooth finish microfibre upper
• Sole resistant to 90 °C (degrees Celsius)
• Padded Tongue ensures maximum comfort
• Padded Upper Collar ensures increased comfort

Sole:

• Temperature Maximum 90 °C (degrees Celsius)
• Inner Sole - Full Removable Mesh & EVA Inner Soles
• Dual Density Poly-Urethane Sole
• Oil and acid resistant Dual Density PU
• Slip Resistance – Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance – Tested to 30.000 flex cycles
• Grey & Dark Grey Outer Sole  

Toe Cap:

• Wide Profile Steel Toe-Cap
• Tested to an impact resistance of 200 Joules

Anti-Static Properties:

• Product is anti-static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of inner sole reduces static resistance

The S3 Technical Boot is ISO 20345 and SABS approved. These specialized workboots have been designed to keep your feet safe in the harshest of conditions. Features of this technical workboot include a full grain, high quality buffalo leather with S3 water resistant coating, a dual density polyurethane sole with anti-penetration, and the widest carbon steel toe cap.

• Full grain high quality buffalo leather with S3 water resistant coating
• Dual density polyurethane REBEL Safetygear sole with anti-penetration
• Widest carbon steel toe cap
• Breathable and abrasion resistant Taibrelle lining
• Fully padded collar and tongue for additional comfort
• Nickel-free D-rings

Materials:

• Upper: Full Grain High Quality Buffalo Leather c/w with S2 Water Resistant Coating
• Lining: Breathable and Abrasion Resistant Tai-brella (Equivalent to Cambrelle)

Eyelet:

• Nickel-free Eyelets

Special Features:

• Hi-Viz “In the Dark” Safety Strip for added visibility

Sole:

• Dual Density Poly Urethane Sole- injection moulded
• Inner Sole - Biagioli IBITECH 252 2mm Foam Insole Board
• Temperature Maximum 90ºC (degrees Celsius)
• Oil and acid resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles
• Steel mid sole for anti-penetration
• S2 Water resistant upper

Toe Cap:

• Steel Toe Cap
• Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

- Poly-cotton canvas is a cotton fabric with a high-density polyester thread weaved into it, making it easier to care for and more hard-wearing than traditional 100% cotton.

- Modern and contoured fit.

- Seven custom utility pockets.

- Triple stitched for reinforcement.

- Bar tacked at stress points.

- Stretch waist for comfort.

- Functional tool loop.

A quality heat resistant safety boot. The Thermotrak Hi is ISO 20345 and SABS approved. The best shoe suited for high temperature applications, this boot features more ankle protection than the Thermotrak Mid, offers a long life nitrile outsole, a max high temperature application of 300°C (degrees Celsius) and a steel shank for torsional rigidity.

• Hygienic removable cushioned inner sole with anti-microbial properties
• Excellent wearing properties - long life Nitrile outsole
• High temperature application max exposure of 300°C
• Taibrelle moisture wicking lining
• Steel shank for torsional rigidity

Materials:

• Upper: Full Grain High Quality Buffalo Leather
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Special Features:

• Cemented Sole
• No Laces
• Padded Front Flap ensure maximum protection
• Quick Release Velcro straps on sides of flap
• Padded Upper Collar ensures increased comfort

Sole:

• Nitrile Rubber Heat-Resistant Sole – cemented
• Inner Sole - 2mm Anti-Microbial Foam Insole Board complete with Steel Shank and Padded Comfort Zones
• Temperature Maximum 300ºC (degrees Celsius)
• Oil and acid resistant Nitrile Rubber
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements. However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required. Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Sports shoe technology in a safety boot. The Velocity Shoe is ISO 20345 and SABS approved. This versatile safety shoe offers superior ventilation and durability, a technically advanced, lightweight dual density polyurethane sole, and the Maxi-grip outer sole offers ideal slip resistance.

• High quality breathable upper combining super ventilation and durability.
• Hi-viz reflective strip for added visibility.
• Rubber Toe-Bump for added scuff protection.
• "Easy-On" heel pull-tag.
• Technically advanced, lightweight PU/Rubber sole.
• Maxi-grip outer sole - ensuring high durability and slip resistance

Materials:

• Upper: High quality breathable upper combining super ventilation and durability, with hi-Visibility “In the Dark” safety strip for added visibility. Rubber Toe-Bump for added scuff protection
• Lining: Breathable and Abrasion Resistant Tai-brelle (equivalent to Cambrelle) “Easy-On” Heel Pull-Tag

Eyelet: 

• Woven Fabric Loops and Nickel-free D-Rings

Sole:

• Technically Advanced, Light weight dual density Polyurethane/Rubber
• Maxi-grip outer sole - ensuring high durability and slip resistance
• Temperature Maximum 300ºC (degrees Celsius)
• Oil and acid resistant PU/Rubber
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Toe Cap:

• Steel Toe Cap - Tested to an impact resistance of 200 Joules

Anti Static Properties:

• Product is anti static. If application is life critical additional consultation with product expert is required.Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance

Attractive, soft toe, casual work shoe. The WorkPro is the ideal shoe as casual work footwear, where a clean and uniform look is ideal. The Workpro’s ergonomic design and versatility, as well as its affordable price tag, make this non-safety shoe a certain favourite among hospital, hotel, forecourt, restaurant, retail, cleaning, promotional, event, and front desk staff.

• Water resistant action leather upper
• Exceptionally comfortable
• Breathable and abrasion resistant Taibrelle (equivalent to Cambrelle)
• Lightweight double density PU sole
• Highly durable, slip- and oil-resistant outsole
• Great value for companies looking for a uniform shoe for their staff

Materials:

• Upper: Black, Water Resistant Action Leather Upper
• Lining: Breathable and Abrasion Resistant Tai-brelle (Equivalent to Cambrelle)

Eyelet:

• Black Steel Eyelets

Sole:

• Temperature Maximum 90ºC (degrees Celsius)
• Dual Density Poly Urethane Rebel Sole
• Inner Sole - Biagioli IBITECH 252 2mm Foam Insole Board
• Oil and acid resistant Dual Density PU
• Slip Resistance - Tested to SATRA PM144 1992 and meets these requirements
• However, care should always be taken on wet or oily surfaces
• Crack Resistance - Tested to 30,000 flex cycles

Anti Static Properties:

• Product is NOT anti-static. If application is life critical additional consultation with product expert is required.Electrical resistance can be significantly changed by flexing, contamination or moisture. Introduction of additional inner sole reduces static resistance